rtl_tcp SDR 1.5.2

rtl_tcp SDR 1.5.2

HotPaw Productions – Commercial – iOS
z 26 głosów
Najnowsza wersja
1.5.2
image/svg+xml VERY GOOD User Rating

An iOS application, the RTL-SDR Software Defined Radio receiver app offers functionality to tune into AM, FM, SSB, and CW radio signals. Additionally, users can analyze an RF spectrum and waterfall display. To enable connectivity with networked RTL-SDR USB peripherals, the app interfaces through the rtl_tcp network protocol.

The operational setup of this application involves the necessity of an external rtl_tcp server. Given that iOS devices do not currently support the direct linkage of USB peripherals like an RTL-SDR, the utilization of this app mandates access to a server environment, such as a Raspberry Pi or Mac. The server should have an RTL-SDR device connected to its USB port and be executing the rtl_tcp protocol at a TCP/IP network address that is reachable from the iOS device. This configuration effectively permits a Raspberry Pi or Mac to serve as the USB interface for the iOS device.

Furthermore, the rtl_tcp SDR application can establish connections with other servers such as hfp_tcp for Airspy HF+, rsp_tcp for SDRPlay devices, and lmm_tcp for LimeSDR Mini. For details regarding server source code, users are advised to refer to GitHub. Additionally, it is feasible for this app to directly interface with a Hermes Lite 2 QRP transceiver, either through a known IP address or by utilizing an hl2_tcp server.

It's important to note that there is no provision for assistance in installing rtl_tcp or any other required tcp software associated with this application on devices like a Raspberry Pi. Potential users are advised against downloading this app unless they possess a proficient understanding of Software Defined Radio, own an RTL-SDR or an equivalent USB SDR peripheral, and have already deployed and tested rtl_tcp on their Raspberry Pi, Mac, or other compatible server.

Moreover, it's crucial to highlight that due to the significant bandwidth requirements for real-time RF sample streaming from an RTL-SDR, a robust network connection is imperative. It is recommended that the rtl_tcp server be connected via wired means rather than being on the same WiFi network as your iOS device.

Przegląd

rtl_tcp SDR jest programem Commercial w kategorii (2), opracowany przez HotPaw Productions.

Najnowsza wersja rtl_tcp SDR jest 1.5.2, wydany na 07.07.2024. Początkowo był to dodane do naszej bazy na 26.03.2024.

rtl_tcp SDR jest uruchamiany w następujących systemach operacyjnych: iOS.

Użytkownicy rtl_tcp SDR dał pewien oszacowanie od 4 z 5 gwiazdek.

Zrzuty ekranu (kliknij aby obejrzeć powiększenie)

Darmowe bezpieczne pobieranie plików sprawdzonych przez UpdateStar

Kup teraz!
App Store
Bądź na bieżąco
z UpdateStar freeware.

Najnowsze recenzje

A App Explorer
Eksploruj świat aplikacji dzięki Eksploratorowi aplikacji firmy SweetLabs.
HP System Event Utility HP System Event Utility
HP System Event Utility: Usprawnij zarządzanie zdarzeniami systemowymi
utools utools
Zwiększ swoją produktywność dzięki uTools!
Canon G2000 series MP Drivers Canon G2000 series MP Drivers
Wydajne sterowniki drukarki dla serii Canon G2000
Autodesk Featured Apps Autodesk Featured Apps
Zwiększ swoją kreatywność dzięki polecanym aplikacjom Autodesk!
S safeRweb
Chroń swoją prywatność w Internecie z safeRweb
Aktualny biuletyn