An iOS application, the RTL-SDR Software Defined Radio receiver app offers functionality to tune into AM, FM, SSB, and CW radio signals. Additionally, users can analyze an RF spectrum and waterfall display. To enable connectivity with networked RTL-SDR USB peripherals, the app interfaces through the rtl_tcp network protocol.
The operational setup of this application involves the necessity of an external rtl_tcp server. Given that iOS devices do not currently support the direct linkage of USB peripherals like an RTL-SDR, the utilization of this app mandates access to a server environment, such as a Raspberry Pi or Mac. The server should have an RTL-SDR device connected to its USB port and be executing the rtl_tcp protocol at a TCP/IP network address that is reachable from the iOS device. This configuration effectively permits a Raspberry Pi or Mac to serve as the USB interface for the iOS device.
Furthermore, the rtl_tcp SDR application can establish connections with other servers such as hfp_tcp for Airspy HF+, rsp_tcp for SDRPlay devices, and lmm_tcp for LimeSDR Mini. For details regarding server source code, users are advised to refer to GitHub. Additionally, it is feasible for this app to directly interface with a Hermes Lite 2 QRP transceiver, either through a known IP address or by utilizing an hl2_tcp server.
It's important to note that there is no provision for assistance in installing rtl_tcp or any other required tcp software associated with this application on devices like a Raspberry Pi. Potential users are advised against downloading this app unless they possess a proficient understanding of Software Defined Radio, own an RTL-SDR or an equivalent USB SDR peripheral, and have already deployed and tested rtl_tcp on their Raspberry Pi, Mac, or other compatible server.
Moreover, it's crucial to highlight that due to the significant bandwidth requirements for real-time RF sample streaming from an RTL-SDR, a robust network connection is imperative. It is recommended that the rtl_tcp server be connected via wired means rather than being on the same WiFi network as your iOS device.
Resumen
rtl_tcp SDR es un software de Commercial en la categoría de Utilidades del sistema desarrollado por HotPaw Productions.
La última versión de rtl_tcp SDR es 1.5.2, aparecido en 07/07/2024. Inicialmente fue agregado a nuestra base de datos en 26/03/2024.
rtl_tcp SDR se ejecuta en los siguientes sistemas operativos: iOS.
Los usuarios de rtl_tcp SDR le dio una calificación de 4 fuera de 5 estrellas.
Productos relacionados
08/11/2024 | RegCool 2.015 |
08/11/2024 | Visual Studio Code 1.95.2 |
08/11/2024 | Calibre 7.21.0 |
07/11/2024 | Microsoft Edge 131.0.2903.27 |
07/11/2024 | Vivaldi Browser 7.0.3495.11 |
App Store
con UpdateStar freeware.
Últimas reseñas
iTop Data Recovery
iTop Data Recovery: ¡Su solución definitiva para la pérdida de datos! |
|
Ashampoo PDF Pro
Edición de PDF optimizada con Ashampoo PDF Pro. |
|
DriverPack Notifier
Mantenga sus controladores actualizados con facilidad |
|
Razer Synapse
Lleva tu configuración de juego al siguiente nivel con Razer Synapse |
|
ATI Catalyst Install Manager
ATI Catalyst Install Manager: Fácil instalación y gestión de controladores de gráficos ATI |
|
Open-Shell
¡Mejore su experiencia con Windows con Open-Shell! |